Tutorial Networking Simulation With Cisco Packet Tracer part 1 | itfasikom.blogspot.com

Packet Tracer is a handy software from Cisco to simulate computer networks. With the software Packet Tracer we do not need to pay to buy the hardware that will be used for the study.

This software is also used to deploy a network expert Network Firm or Agency.

So why not try it ?

If you do not have this software please download in here.

DOWNLOAD CISCO PACKET TRACER

Install Program and open : Start - Program - Cisco Packet Tracer

For this tutorial we will to simulate "Cafe Network" / "Warnet" with 1 router, 1 hub, and 5 PC Client.
so include component with click and drag (List Device ==> Bottom Left) 

• Router-PT 
• IP Address : 192.168.1.1
• Subnet Mask : 255.255.255.0
• Hub-PT
• PC-PT
• PC-0
• IP Address : 192.168.1.2
• Subnet Mask : 255.255.255.0
• PC-1
• IP Address : 192.168.1.3
• Subnet Mask : 255.255.255.0
• PC-2
• IP Address : 192.168.1.4
• Subnet Mask : 255.255.255.0
• PC-3
• IP Address : 192.168.1.5
• Subnet Mask : 255.255.255.0
• PC-4 
• IP Address : 192.168.1.6
• Subnet Mask : 255.255.255.0
• Automatically Choose Connection Type 

Setting Router : Double click - config - include IP Address and Subnet Mask - Port Status On

You can add to port hub (Bottom Right). Finally setting is complette you must click on hub (green color)

Now, setting PC-Client. click - config - Global Setting and include gateway

Next Click FastEthernet and include IP Addres and Subnet Mask.
 

After all PC-Client already be set. We will test it with ping.
Click PC Client : Desktop - Command Prompt.
type : ping <ip address>
if success will appear reply from bla bla bla